http://www.steelstrapping.com.cn/blog/ zh-cn PBlog2 v2.4 http://www.steelstrapping.com.cn/blog/images/logos.gif http://www.steelstrapping.com.cn/blog/ qingdao ausense http://www.steelstrapping.com.cn/blog/article/admin20141128161316.html yupack@126.com(admin) Fri,28 Nov 2014 16:13:16 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=82   Steel strapping machine generally consists of two parts, one part is the tensioning device, a part of the locking device. For steel strapping machine, tension device are versatile,strapping belt can be applicable to all specifications, the only difference is that the locking device. Whether manual or pneumatic steel strapping machine steel strapping machine, there are such problems.
  Usually, we further suggested steel customers is what specifications on what types of locking device, so as to achieve the best effect of the lock, but if the user specification of strip is a lot of, need to be universal equipment, then the locking device is concerned, most can be compatible with the specifications of a tape, such as locking machine is only 32# downward compatible with a specification is 25#, locking device is not upward compatible, because it to the lock button machines. At the same time also is not backward compatible with too much, if too small buttons on the locking machine inside, there will be no tight lock state.
  In the end, the user would like to buy a steel strapping machine that strapp all strip is not possible, must according to the specification of strip to select the appropriate equipment, in order to achieve the best effect of binding.
 

]]> http://www.steelstrapping.com.cn/blog/article/admin20141126164102.html yupack@126.com(admin) Wed,26 Nov 2014 16:41:02 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=81   At the dock or harbor freight yard warehouse steel strapping machine, Ausense is generally recommended that you select manual steel strapping machine, because of strong mobility, customers of the wooden box placed warehouse, not the same place, there is no way to fixed source, so there is no way to use pneumatic steel strapping machine, can only be selected manually steel strapping machine.
  Number of daily packaging should not particularly large, but not fixed every day, packaging, so choose manual steel strapping machine will corresponding reduce costs, but also in Hong Kong, worker protection consciousness of packing machine is not so strong, if the selection of pneumatic steel strapping machine, one is the high cost, moreover there is no good maintenance, pneumatic steel strapping machine is prone to failure, it will affect the efficiency of packaging. However, enterprises packaging used, in order to improve the work efficiency, and have a fixed place to work, it suggested that the choice of pneumatic steel strapping machine.

]]> http://www.steelstrapping.com.cn/blog/article/admin20141121150658.html yupack@126.com(admin) Fri,21 Nov 2014 15:06:58 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=80   PET strapping tape, also called plastic steel belt, it is used for pneumatic strapping machine, replacing the use of market of iron steel, at the same time with the domestic production of strapping tape technology breakthrough, PET strapping tape is applied more widely, the quality is more strong. The main advantage of PET strapping tape in the following points:
  1, PET strapping tape, not only to achieve the requirements of steel strength, but also has wide range of application, the production cost is obviously reduced!
  2, PET strapping tape is used as a new type of polyester raw material for producing polyester strapping tape, no environmental pollution, decomposition products without any side effects on the environment, is a national advocate for the use of environmental protection strapping tape!
  3 properties, PET strapping tape pollution-free representation can be re processing and utilization, maximize the recovery, is a kind of renewable and recyclable resources, saving resources for the society as a whole!
  4, PET strapping tape not only strength meet the requirements of use, and flexibility is very user-friendly, convenient operation, and also has the very big development space!
  PET strapping tape, beautiful appearance, stable performance, non polluting characteristics is applied to various industrial fields, believe in the future, it can more satisfy people requirements! Ical support and timely service. "Quality first, credibility first" business purposes, sincerely service to our users!

]]> http://www.steelstrapping.com.cn/blog/article/78.html yupack@126.com(admin) Mon,17 Nov 2014 16:01:40 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=78   Steel strapping machine according to buckle form can be divided into iron buckle and the buckle free type, which exempts the buckle type steel strapping machine can be divided into pneumatic buckle free type and hand free button, although these two kinds of distinction, strip but the two respectively applicable to different specifications, are generally this kind of distinction, hand free button can be bundled 13-19mm wide strip, and the pneumatic buckle free type steel belt width of 16-32mm, for the steel strip thickness, hand free button strip packing machine can only use 0.65mm about the thickness of the strip, and Pneumatic Strip buckle free type steel strapping machine is only applicable to 1.0mm thickness the following. So why buckle free steel strapping machine for steel strip generous have requirements? There are two main reasons:
  1, for manual buckle free steel strapping machine, strip width and thickness is too high, steel hardness is high, artificial strength is limited, there is no way to use the machine pressing strip hardness too high. Manual buckle free steel strapping machine is the main principle of artificial tightening, artificial buckle, but if use manual equipment to package a wide strip, so artificial efforts can not achieve the two layer strip bite together, so that will not be realized in packing. For pneumatic buckle free steel strapping machine, also is such, although pneumatic packing machine power is not artificial, but air strip, but the hardness is too high, the machine is no way to put the two layer strip bite together, also cannot achieve the packaging, but also easy to damage the machine cutter and a clamping knife. Is the service life of equipment is greatly reduced.
  2, for the manual packing machine, artificial tightening efforts is not enough. In general we default to the need to use wide strips are tightening force required is relatively large, and the clamping force is not artificial can achieve, so when the width of the strip tied, obviously can not meet the need of manual equipment. For pneumatic packing machine, tightening efforts can be achieved, but there is no way to realize the two layer strip occlusion.
  Based on the above two reasons, buckle free steel strip packing machine can't be tied the wide and thick is mainly of packaging machine packing force can not meet the demand, so in the choice of steel strapping machine, classification principle we adopt actually like the beginning of the article noted, if the user has other special requirements can and Axiomtek steel strapping machine sales department contact, they will recommend automatic strapping packing equipment for you.

]]> http://www.steelstrapping.com.cn/blog/article/admin20141110161810.html yupack@126.com(admin) Mon,10 Nov 2014 16:18:10 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=76   The customer after ordering painted steel strap, may worry about the damage caused by road transport packaging or product, let me introduce the specific mode of packing.
  1, the straight platoon type packing: each bundle of 2 roll or 3 (volume 200mm, inner diameter 300mm) bundle weight 50 + 1kg, 20 bundles of a tray, weighing about 1 tons. The inner layer is moisture-proof stencil, the middle layer is a plastic film, the outer layer is made of corrugated composite paper packaging, wooden or iron plate pallet.
  2, reciprocating type packaging (applicable to machinery packing): each bundle of 1 volumes (coil inner diameter 406mm), bundle weight 45-50 kg. Each bundle of packaging inner moisture stencil, the middle layer is a plastic film, the outer layer is made of corrugated composite paper packaging, bundles of 14 or 16 bundles play a tray.
 

]]> http://www.steelstrapping.com.cn/blog/article/admin20141107152518.html yupack@126.com(admin) Fri,07 Nov 2014 15:25:18 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=75   Due to the wear work parts, screw loosening air pressure reducing reason,pneumatic steel strapping tool failure, therefore must be ruled out in time, make the machine can normally work smoothly, the cause of the fault has the following several aspects.
  1, in the pneumatic strip packing machine motor and cylinder body and all transmission, rotating parts, each class before use, must be lubricated with oil, the amount of the other, should be filled with 22# gas wheel oil regularly, quantitative in oiler in oil supply, in order to maintain a fixed, when the pneumatic steel strapping tool'motor work from the oiler, lower drop of oil is 40 - 60 drops/min best.
  2, compressed air does not match the 0.4 - 0.6Mpa, must give the adjustment, otherwise, too low pressure will affect the binding quality, high pressure can make the machine wear too fast.

]]> http://www.steelstrapping.com.cn/blog/article/admin20141103162954.html yupack@126.com(admin) Mon,03 Nov 2014 16:29:54 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=74   For the pneumtic steel strapping machine, main principles and technical performance, pneumatic buckle free steel strapping machine is Qingdao Ausense company based on years of accumulated steel strapping packing machinery experience, research and development of the new advanced strapping machine, automatic strapping machine is different with the machine and the PP straps, is mainly applicable to the packing of various specifications of the metallurgical enterprises of tubing, profiles, plates, bars and other products, but also suitable for non-ferrous metal ingot products and wood products industry, glass manufacturing, paper products such as packaging, the aerodynamic principle of packaging machine is relatively simple. Its biggest characteristic is the use of pneumatic and hydraulic combined with the use of binding belt, two ends of the joint, high pressure seal card, do not need to lock using the conventional package, save the packing expenses lock, the operation more convenient, is an ideal packing machinery.

  B Steel pneumatic packing machine main technical parameters: This paper takes Qingdao Ausense MK-32 pneumatic strip packing machine as an example     Traction: greater than or equal to 8KN
    The seal bears the maximum pulling force: more than 13KN
    The use of pressure: greater than or equal to 0.55Mpa
    The tensile strength of the use of strapping strip should be greater than or equal to 735Mpa, while the tensile strength of the steel strip is less than 600Mpa, not suitable for the machine.
    Strapping strip specifications: width 32mm, thickness 0.8mm ~ 1.0mm.
    Dimensions: 430 x 300 x 400mm (length * width * height).
    Weight: 14.1Kg + 0.15Kg.
 

]]> http://www.steelstrapping.com.cn/blog/article/admin20141031153702.html yupack@126.com(admin) Fri,31 Oct 2014 15:37:02 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=73   Due to the wear work parts, screw loosening air pressure reducing reason, machine will malfunction, so to be ruled out in time, make pneumatic steel strapping tool function properly and smoothly work, the cause of the fault has the following several aspects.
  1, In a pneumatic motor and a cylinder body and all transmission, rotating parts, each class before use, must be lubricated with oil, the amount of additional, should be filled with 22# gas wheel oil regularly and quantitatively in the oiler in the oil supply to maintain a fixed, when the pneumatic motor work, lower from the oiler drops of oil is 40 - 60 drops of /min best.
  2, compressed air does not match the 0.4 - 0.6Mpa, must be given to adjust, otherwise, too low pressure will affect the binding quality, high pressure can make the machine wear too fast.
  3, lubricator, oil water separator every three months using kerosene wash once, and daily removal of stagnant water in oil-water separator.
  4, The gap between the the friction wheel and the pad wheel in between 0.5-0.7mm, otherwise, should be adjusted, and the timely removal of scrap and dirt on the friction wheel.
  5, due to the wear of parts in the long term, environmental pollution, poor lubrication, failure may occur, so the timely discovery, timely elimination of faults is very important, inspection and maintenance of the following, using common tools can be solved, can grasp the following techniques will not be because of the small fault caused by the shutdown, shutdown machine losing valuable time and turn to the manufacturers.

]]> http://www.steelstrapping.com.cn/blog/article/admin20141029164903.html yupack@126.com(admin) Wed,29 Oct 2014 16:49:03 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=72   Steel strapping machine, is the use of steel strip winding products or packages, and then press the button tightening tightening strip, redundant, so that the strip close to the products or packages, and then the both surfaces of the steel strip connected machines through the thermal effect of melting or use steel buckle material. The main role of the strip packing machine is to make the steel strip can be tied closely to the product or the surface of the package, ensure the transport, storage is not a result of binding is not strong the scattered, but also have to make products bundled tidy functions; avoid messy placing, save storage space.
  Steel strapping machine classification and advantage
   Pneumatic sealless steel strapping tool is suitable for packaging of general plane. For example, a box body, pallets and other kinds of similar packaging form. Buckle free steel strapping machine does not require the use of additional steel buckle; the main features is that the average tensile strength of the connection buckle free about steel tensile strength 80%, very reliable, and can save about 10% of the overall cost of packaging. Universal type steel strip used in almost all fields of packing tool, the use of reliable, robust design, easy operation and is portable, has been widely used.
  Manual strip packing machine for its small volume, easy to carry, durable and known for. Has been widely used in various industries. It is composed of speed tensioner, after interlocking device used in combination. General specification for 12mm, 16mm, 19mm, 25-32mm. And the gap between the wheel and the wheel friction pad is between 0.5-0.7mm, otherwise, should be adjusted, and the timely removal of scrap and dirt on the friction wheel.   Pneumatic steel strapping difference between machine and manual packing machine is the former is provided with a motor, should first filling oil before use. It has certain requirements for pressure, otherwise affect the packaging effect.
 

]]> http://www.steelstrapping.com.cn/blog/article/71.html yupack@126.com(admin) Mon,27 Oct 2014 16:37:05 +0800 http://www.steelstrapping.com.cn/blog/default.asp?id=71
  For the automatic strapping machine,strap tape is required, the general PP with PP belt strapping machine, pet with pet belt strapping machine, but for portable Plastic strapping machine, which is one of its advantages, PP also packaged with the pet strap, so the machine is how to realize?
  In fact, if the understanding of the plastic strapping machine users, this is a very simple matter, usually solves the compatible problem of these two kinds of tape mainly has two aspects: one is the problem of strip thickness, the other is a hot issue. For the first question, Ausense strapping machine are equipped with a corresponding gasket on the device, when the need to play a PET tape, can take a few pieces of gasket corresponding, when need more to put a few pieces of gasket package PP belt can correspondingly, which solved the packing belt thickness is inconsistent the problem of. For the second problem is easier to solve, because the bonding process of portable pneumatic packing machine is provided by the operating personnel to control, so for thick webbing prolonged heating can, for a thin PP belt can shorten the heating time.
  Therefore, two kinds of strap for a machine to pack machine can be realized, and the bundling effect much than the ordinary manual packing machine, than the semi automatic strapping machine such as the use of more convenient, less susceptible to the location and the size of object restriction.
 

]]>