Pneumatic steel strap tool prolong service life

  Pneumatic sealless steel strapping tool is one of the many packaged equipment relatively small machine category, the internal structure is relatively simple, the packing process operation is very simple. Although pneumatic sealless steel strapping tool is on the two step up the knife movement left the packing process, but the protection and to intensify the knife moving pneumatic sealless steel strapping tool maintenance is  must to do.
  1, The lubrication: make sure that the pneumatic buckle free lubrication strip packing machine parts, prevent damage to intensify the knife is caused due to excessive friction. At least water filter and oil mist cleaned once every six months.
  2, The general pressure:pneumatic sealless steel strapping tool use shall be more than 0.55Mpa, the air pressure is adjusted to a proper tension, once adjusted, will be fixed, not free to change.
  3, Drainage:the use of pneumatic must take the storage tank and water filter in the water excluded before clean packing machine.
  4, Adjusting the throttle valve when the strip: the use of low atmospheric pressure or used soft packaging, will be very difficult to form the ideal sealing, can be adjusted by the throttle valve. Clockwise rotation, reduce airflow, counter clockwise to increase airflow.
  5, The volume of oil in the turbocharger control: if Pneumatic sealless steel strapping tool after long-term use, booster oil decreases, cause strip and sealing large office space, cannot meet the packaging requirements. And through other methods to adjust not to see the effect, inspect supercharger oil quantity, and filled with oil. The above is Axiomtek technology and staff in the work process, the Pneumatic sealless steel strapping tool some experience in using and extending the life of the experience, although not complete, however, we still hope to bring convenience and benefit for you. I hope you will own some experience in working out to share with you.